Metro EzyClean Glass Protection

Congratulations on your purchase of Metro EzyClean Glass Protection. To register and activate your ten (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

WARRANTY INFORMATION

Metro EzyClean Technology makes cleaning a breeze, creating both a water and oil repellent surface. Metro Performance Glass warrants that Metro EzyClean Technology will remain water repellent for a period of ten years from the date of the receipt provided by your dealer.

CONDITIONS

Metro EzyClean Technology must be applied and maintained as per the care instructions to validate and maintain the warranty.

If, within the warranty period, you feel that your glass is no longer easy to clean, please send an email to ezyclean@metroglass.co.nz and provide a brief explanation of the problem along with your name, address, telephone number, date of installation and warranty code.

If it is determined that an area that has been treated has not remained water repellent, Metro Performance Glass will gladly provide replacement Metro EzyClean Technology for Glass in an amount determined to be adequate to re-coat the area deemed unprotected. Metro Performance Glass reserves the right to inspect the glass in order to determine that the product has been applied and maintained in a matter consistent with the manufacturer’s instructions.

CARE INSTRUCTIONS

To keep your glass looking new, the glass needs to be cleaned each week using a damp microfibre cloth and a mild detergent to remove any soap scum and grime from the glass. Be careful not to use any rough, gritty, highly acidic, alkaline or abrasive cleaners such as Jif, Ajax or cerium oxide as they may damage the protective coating.

For areas with hard water or well/bore water, due to a higher concentrate of mineral deposits such as lime and calcium, a build up may occur on the protective coating and may not be easily removed with a mild detergent. A solution of white vinegar and water (1 part vinegar to 5 parts water) should be sprayed onto the glass and allowed to soak for several minutes. This will dissolve any mineral deposits that have built up on the glass surface. A damp microfibre cloth should then be used to wipe over the glass.

ColourBak Warranty

To register and activate your ten (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrant that all ColourBak Back Painted Glass manufactured by Metro Performance Glass:

  1.  Are fit for all purposes for which they are commonly supplied, and
  2. Are free from defects to the extent referred to in AS/NZS 4667, and
  3. Are safe and durable to the standard referred to in NZS 4223, and
  4. Is Grade A safety glass to the standard defined in AS/NZS 2208 (where Tempafloat toughened safety glass is used).

Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, the glass will not;

  1. Suffer from loss of thermal or mechanical performance characteristics if TempaFloat toughened safety glass is used as defined in the relevant Standard AS/NZS 2208
  2. Suffer from fading, cracking or peeling of the paint from the glass surface under normal internal conditions.  

In the event that the above occurs, Metro Performance Glass will re-supply as supply only replacements the defective glass, and the warranty period will extend to the re-supplied glass for a further period of ten (10) years from delivery.

Metro Performance Glass advises that for determining acceptable quality Metro Performance Glass will not be liable as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass

This warranty shall not apply where any one or more of the following circumstances exist:

  1. The glass edge or surface is damaged by improper handling, storage, glazing, or exposure or contact with any chemicals.
  2. The glass or painted coating is altered in any way.
  3. The glass is subject to high edge or surface impact
  4. The glass has excessive stress around holes or notches due to incorrect mechanical fixing techniques
  5. The glass is subject to abnormal stresses from the load application of bending, heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  6. Toughened glass is subject to repetitive temperature cycling with temperature differentials over 200 degrees Celsius.
  7. The glass is not glazed in accordance with NZS 4223
  8. The product is used to the exterior of the building
  9. The paint coating is exposed directly to water inside a shower, bath or spa
  10. Breakage or fracture for any reason where Tempfloat toughened safety glass is not used (as defined in the relevant standard AS/NZS 2208).

Metro Performance Glass reserves the right to inspect in the field any glass which is alleged to be defective and which is subject to a claim under this warranty or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full.

Compliance of Safety Glass  

TempaFloat is Grade A Toughened Safety Glasses and comply with NZS 4223.2016: Part 3.

TempaFloat is manufactured by Metro Performance Glass to the following standard, and carry Bureau Veritas Certification and Licence Numbers as follows;

Architectural Glass to AS/NZS 2208, Licence numbers 2518, 2603, 2625, 2718

Metro Heat Soaked Warranty (Tempasoak)

To register and activate your ten (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrants that all TempaSoak Heat Soaked Toughened Safety Glass are manufactured by Metro Performance Glass in accordance with AS/NZS 2208, AS/NZS 2080, and NZS 5238 and that;

  1. The glass is fit for all purposes for which they are commonly supplied and
  2. Are acceptable in appearance and finish to the standard referred to in AS/NZS 4667 and
  3. Are safe and durable to the standard referred to in NZS 4223.

In addition statutory guarantees Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, the glass will not;

  1. Suffer from loss of thermal or mechanical performance characteristics as defined in the relevant standard being AS/NZS 2208.  

In the event that the above occurs, Metro Performance Glass will re-supply as supply only replacements the defective glass, and the warranty period will extend to the re-supplied glass for a further period of ten (10) years from delivery.

Metro Performance Glass advises that the TempaSoak product carries a guarantee of acceptable quality and a guarantee that the goods correspond with Metro Performance Glass description of them, but Metro Performance Glass will not be liable under the guarantee of acceptable quality for any loss caused as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass.
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass.

This warranty shall not apply where any one or more of the following circumstances exist:

  1. The glass edge or surface is damaged by improper handling, storage, glazing or through exposure or contact with any chemicals.
  2. The glass is altered in any way.
  3. The glass is subject to high edge or surface impact
  4. The glass has excessive stress around holes or notches due to incorrect mechanical fixing techniques
  5. The glass is subject to abnormal stresses from the load application of bending, heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  6. The glass is subject to repetitive temperature cycling with temperature differentials over 200 degrees Celsius.
  7. The glass is not glazed in accordance with NZS 4223.

Metro Performance Glass reserves the right to inspect in the field any glass which is alleged to be defective and which is subject to a claim under this warranty or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full .

Compliance

TempaSoak is a Grade A Safety Glass and complies with NZS 4223:2016:Part 3.

It is manufactured by Metro Performance Glass to the following standards, and carries Bureau Veritas Certification and Standards NZ Licence Numbers as follows;

Architectural Glass to AS/NZS 2208, Licence numbers 2518, 2603, 2625, 2713

Marine Glass to NZS 5238, Licence numbers 2504, 2351

Automotive Glass to AS/NZS 2080, Licence 2519, 2719, 2601, 2626

Insulated Glass Unit Warranty (Double/ Triple Glazing)

To register and activate your ten  (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited (trading as Metro Performance Glass) warrant that all Insulating Glass Units manufactured by Metro Performance Glass:

  1. Are fit for all purposes for which they are commonly supplied and
  2. Are free from defects to the extent referred to in AS/NZS 4667 ;and
  3. Are safe and durable to the standard referred to in NZS 4223.
  4. Argon units will be filled initially with no less than 90 % argon, and have a gas loss of not more than 1% per year for 10 years

In addition Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, units will not develop material obstruction of vision as a result of dust or film formation on the internal glass surface caused by any failure of the hermetic seal. In the event that the units develop an obstruction of vision due to internal failure of the hermetic seal, Metro Performance Glass will re-supply as supply only replacements the defective units, and the warranty period will extend to the re-supplied units for a further period of ten (10) years from delivery. 

Metro Performance Glass advises that for determining acceptable quality Metro Performance Glass will not be liable as a result of:

  1. An act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents Metro Performance Glass
  2. A cause independent of human control, occurring after the goods have left the control of Metro Performance Glass

This warranty shall not apply where any one or more of the following circumstances apply:

  1. Failure of the hermetic seal is caused in whole or in part by the breaking or fracturing of any portion of the glass unit (Note this includes thermal stress fracture of the glass panes)
  2. The units are installed contrary to our Handling, Storage and Glazing instructions.
  3. The units are damaged by improper handling storage, glazing or through exposure or contact with any chemicals.
  4. The units are altered in any way.
  5. The units are subject to abnormal stresses from the load application of heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  6. The units are treated /glazed with materials which do not remain resilient for the warranty period and/or are not compatible with the unit seal or glass type.
  7. The units are installed in circumstances, which do not provide total water repellency or a suitable water drainage system for the warranty period, or where units have prolonged contact with water.
  8. The units are installed in watercraft, land vehicles, trailers, swimming pools, or commercial refrigeration products without written approval of the installation method.
  9. The units incorporate internal lead lights, copper lights or any form of artwork.
  10. Breakage for any reason.

Metro Performance Glass reserves the right to inspect in the field any units which are alleged to be defective and which are the subject of a claim under this warranty or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full .

Metro Performance Glass’s membership of IGUMA requires product testing as set in EN1279 by BRANZ Ltd, as an independent body.

Metro Laminated Safety Glass Eva Warranty

To register and activate your ten  (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrant that all SafeLite EVA Laminated Safety Glass supplied by Metro Performance Glass is in accordance with AS/NZS 2208 and that;

  1. The glass is fit for all purposes for which they are commonly supplied and
  2. Are acceptable in appearance and finish to the standard referred to in AS/NZS 4667 and
  3. Are safe and durable to the standard referred to in NZS 4223.

In addition to statutory guarantees, Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, the glass will not;

  1.  Suffer from delamination or separation of the glass and interlayer in excess of 3mm from the interlayer edge.
  2. Develop material obstruction of vision as a result of dust or film formation on the internal glass surface.
  3. Suffer from a reduction in light transmission of more than 10 % resulting from clear interlayer deterioration.

In the event that any one of the above occurs, Metro Performance Glass will re-supply as supply only replacements the defective glass, and the warranty period will extend to the re-supplied glass for a further period of ten (10) years from delivery.

Metro Performance Glass advises that Safelite Eva warranty carries a guarantee of acceptable quality and a guarantee that the goods correspond with Metro Performance Glass’s description of them, but Metro Performance Glass will not be liable under the guarantee of acceptable quality for any loss caused as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass.
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass.

This warranty shall not apply where any one or more of the following circumstances exist:

  1. The glass is or has broken or fractured in any portion whether or not causing failure of the lamination.
  2. The glass is damaged by improper handling, storage, glazing or through exposure or contact with any chemicals.
  3. The glass is altered in any way.
  4. The glass is subject to abnormal stresses from the load application of heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  5. The glass is treated /glazed with materials which do not remain resilient for the warranty period and/or are not compatible with the interlayer.
  6. The glass is installed in a manner which creates prolonged contact with moisture at the glass edge.
  7. The glass has a liquid set film, plastic film (other than Metro Glass Protect), sign or similar device applied to any surface of the glass by others.
  8. The glass is installed in swimming pools, spa pools, saunas or commercial refrigeration products without written approval of the installation method.
  9. The glass is not cleaned at least once every 3 months to prevent dirt, mineral or salt buildup on the surface. The manufacturers cleaning recommendations must be followed when cleaning glass.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full .

Metro Performance Glass reserves the right to inspect in the field any glass which is alleged to be defective and which is subject to a claim under this warranty or under the Consumer Guarantees Act 1993.

Compliance

SafeLite EVA is a Grade A Safety Glass and complies with NZS 4223:2016 Part 3. It is manufactured by Metro Performance Glass to the requirements of AS/NZS 2208:1996 and carries Bureau Veritas Certification (Licence numbers 2465 and 2625).

Mirror Warranty

To register and activate your two (2) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrant that all Mirror Glass (mirrors) supplied by Metro Performance Glass:

  1. Are fit for all purposes for which they are commonly supplied, and
  2. Are free from defects to the extent referred to in AS/NZS 4667, and
  3. Are safe and durable to the standard referred to in NZS 4223.

Metro Performance Glass warrant that for a period of two (2) years from the date of delivery, that the mirror will not contain silvering defects resulting in discoloration, black spots or clouding of the silver film which materially obstructs the mirror image of the vision area, subject to the terms and conditions of this warranty.

In the event that the mirror develops the above silvering defects, Metro Performance Glass will replace the defective mirror and the warranty period will extend to the replaced glass for a further period of two (2) years from delivery.

Metro Performance Glass advises that for determining acceptable quality Metro Performance Glass will not be liable as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass

This warranty shall not apply where any one or more of the following circumstances exist:

  1.  If the mirror surface coating or backing is broken or fractured.
  2. The mirror is installed contrary to our Handling, Storage and Glazing instructions.
  3. The mirrors are damaged by improper handling, fabrication, storage or glazing.
  4. If the mirror is subjected to standing water or other liquids.
  5. The mirror is subject to abnormal stresses from the load application of heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  6. The mirror coatings or backings are attacked by incompatible sealants, adhesives, glazing lubricants, cleaning fluids, moisture runoff, paint or insulation solvents or chemical fumes.
  7. The mirror is installed in wet or damp areas without a suitable edge sealer applied to the edges.
  8. The mirror is installed in swimming pool enclosures, bath enclosures or refrigeration products, used externally, without written approval of the installation method.

Metro Performance Glass reserve the right to inspect in the field any mirrors which are alleged to be defective and which are subject to a claim under this warrant or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full.

Screen Print and Digital Print Warranty 

To register and activate your ten (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrant that all TempaClad, TempaScreen & TempaPrint Ceramic Enamel (Fritted) Toughened Safety Glass manufactured by Metro Performance Glass are in accordance with AS/NZS 2208 and that;

  1. The glass is fit for all purposes for which they are commonly supplied and
  2. Are acceptable in appearance and finish to the standard referred to in AS/NZS 4667, and
  3. Are safe and durable to the standard referred to in NZS 4223.

In addition to statutory guarantees Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, the glass will not;

  1. Suffer from loss of thermal or mechanical performance characteristics as defined in the relevant Standard e.g. AS/NZS 2208.
  2. Suffer from cracking, peeling, or deterioration of the ceramic coating under normal conditions.   

In the event that the above occurs, Metro Performance Glass will re-supply as supply only replacements the defective glass, and the warranty period will extend to the re-supplied glass for a further period of ten (10) years from delivery.

Metro Performance Glass advises that TempaClad, TempaScreen & TempaPrint carry a guarantee of acceptable quality and a guarantee that the goods correspond with Metro Performance Glass’s description of them, but Metro Performance Glass will not be liable under the guarantee of acceptable quality for any loss caused as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass

This warranty shall not apply where any one or more of the following circumstances exist:

  1. The glass edge or surface is damaged by improper handling, storage, glazing or through exposure or contact with any chemicals.
  2. The glass or ceramic coating is altered in any way.
  3. The glass is subject to high edge or surface impact
  4. The glass has excessive stress around holes or notches due to incorrect mechanical fixing techniques
  5. The glass is subject to abnormal stresses from the load application of bending, heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  6. The glass is subject to repetitive temperature cycling with temperature differentials over 200 degrees Celsius.
  7. The glass is not glazed in accordance with NZS 4223
  8. The ceramic coating is exposed to geothermal environments
  9. The ceramic coating is used on surface 1 to the exterior
  10. The ceramic coating is exposed directly to water inside a shower, bath or spa

Metro Performance Glass reserves the right to inspect in the field any glass which is alleged to be defective and which is subject to a claim under this warranty or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full .

Compliance

TempaClad, TempaScreen & TempaPrint are Grade A Safety Glass and comply with NZS 4223:2016:Part 3.

They are manufactured by Metro Performance Glass to the following standard, and carry Bureau Veritas Certification and Licence Numbers as follows;

Architectural Glass to AS/NZS 2208, Licence numbers 2518, 2603, 2625, 2718.

Toughened Safety Glass Warranty

To register and activate your ten (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrants that all Tempafloat Toughened Safety Glass are manufactured by Metro Performance Glass in accordance with AS/NZS 2208, AS/NZS 2080, and NZS 5238 and that;

  1. The glass is fit for all purposes for which they are commonly supplied and
  2. Are acceptable in appearance and finish to the standard referred to in AS/NZS 4667 and
  3. Are safe and durable to the standard referred to in NZS 4223.

In addition statutory guarantees Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, the glass will not;

  1. Suffer from loss of thermal or mechanical performance characteristics as defined in the relevant standard being AS/NZS 2208.  

In the event that the above occurs, Metro Performance Glass will re-supply as supply only replacements the defective glass, and the warranty period will extend to the re-supplied glass for a further period of ten (10) years from delivery.

Metro Performance Glass advises that the TempaFloat product carries a guarantee of acceptable quality and a guarantee that the goods correspond with Metro Performance Glass description of them, but Metro Performance Glass will not be liable under the guarantee of acceptable quality for any loss caused as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass.
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass.

This warranty shall not apply where any one or more of the following circumstances exist:

  1. The glass edge or surface is damaged by improper handling, storage, glazing or through exposure or contact with any chemicals.
  2. The glass is altered in any way.
  3. The glass is subject to high edge or surface impact
  4. The glass has internal impurities such as nickel sulphide
  5. The glass has excessive stress around holes or notches due to incorrect mechanical fixing techniques
  6. The glass is subject to abnormal stresses from the load application of bending, heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  7. The glass is subject to repetitive temperature cycling with temperature differentials over 200 degrees Celsius.
  8. The glass is not glazed in accordance with NZS 4223.

Metro Performance Glass reserves the right to inspect in the field any glass which is alleged to be defective and which is subject to a claim under this warranty or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full .

Compliance

TempaFloat is a Grade A Safety Glass and complies with NZS 4223:2016:Part 3.

It is manufactured by Metro Performance Glass to the following standards, and carries Bureau Veritas Certification and Standards NZ Licence Numbers as follows;

Architectural Glass to AS/NZS 2208, Licence numbers 2518, 2603, 2625, 2713

Marine Glass to NZS 5238, Licence numbers 2504, 2351

Automotive Glass to AS/NZS 2080, Licence 2519, 2719, 2601, 2626

Metro Float Glass Warranty

To register and activate your ten (10) year warranty, please complete the form below. This information is strictly for use by Metro Performance Glass and will not be given or sold to any other party.

Metropolitan Glass and Glazing Limited and its subsidiaries (Metro Performance Glass), warrant that all Float Glass supplied by Metro Performance Glass:

  1. Are fit for all purposes for which they are commonly supplied, and
  2. Are free from defects to the extent referred to in AS/NZS 4667, and
  3. Are safe and durable to the standard referred to in NZS 4223.

Metro Performance Glass warrant that for a period of ten (10) years from the date of manufacture, the glass will not;

  1. Deteriorate in a manner that the glass will not be deemed acceptable according to AS/NZS 4667:2007 without physical interference to cause imperfections according to that standard.

In the event that the above occurs, Metro Performance Glass will re-supply as supply only replacements the defective glass, and the warranty period will extend to the re-supplied glass for a further period of ten (10) years from delivery.

Metro Performance Glass advises that for determining acceptable quality Metro Performance Glass will not be liable as a result of:

  1. Any act of default or omission of, or any representation made by, any person other than Metro Performance Glass or the employees or agents of Metro Performance Glass
  2. Any cause independent of human control, occurring after the goods have left the control of Metro Performance Glass. This includes damage of the glass surface from deposits or impurities in rain water or collected rain water and house hold water supplies used to clean the glass.

 This warranty shall not apply where any one or more of the following circumstances exist:

  1. The glass edge or surface is damaged by improper handling, storage or glazing.
  2. The glass is altered in any way.
  3. The glass is subject to high edge or surface impact.
  4. Processed holes or notches are includes in the glass without prior written consent from Metro Performance Glass.
  5. The glass is subject to abnormal stresses from the load application of bending, heat, excessive vibration, building or foundation movement or the failure to provide adequate expansion or contraction provisions in the framing members.
  6. The glass is subject to repetitive temperature cycling with temperature differentials over 30 degrees Celsius.
  7. The glass is not glazed in accordance with NZS 4223.

Metro Performance Glass reserves the right to inspect in the field any glass which is alleged to be defective and which is subject to a claim under this warranty or under the Consumer Guarantees Act 1993.

This warranty does not limit or affect any rights a domestic purchaser may have under the Consumer Guarantees Act 1993 (“CGA”).

Please note that, where product/glass is supplied for the purpose of business, the guarantees contained in the CGA do not apply.  Further, if the Customer on-sells the goods it will contract out of the CGA (and any other consumer law) to the extent permissible by law effectively and in writing wherever the goods are on-sold for the purposes of the Customer’s customer’s business. For buyers who re-supply the products/glass in trade,  Cl 8. of the Metro Performance Glass Standard Terms and Conditions of Trade of  will apply in full .

 

Compliance

Float Glass is processed by Metro Performance Glass to the following standards; AS/NZS 4667:2000

4.1 Type 1 glass: Annealed glass, clear or tinted (heat absorbing)-general glazing, and multi glazing-quality.

5.1 Ordinary annealed glass: Ordinary annealed glass is intended for general glazing applications where functional aesthetic characteristics are a consideration and where limited, minor surface blemishes are not a major concern.

A summary of requirements for quality according to AS/NZS 4667:2000 is available from Metro Performance Glass on request and maybe attached to this document.