Hydraulic Hinge


The Biloba Hydraulic Hinge is a unique hinge for self closing frameless internal glass doors


The Biloba hinge is an Italian made, oil-dynamic hinge made for self closing doors, with an adjustment feature for the closing speed of the door.

The hydraulic operation means floor springs are not required as these are time consuming and messy to install into existing building structures.

The Biloba hinges feature hold open stops at 0, -90, and +90 degrees, and are also available non hold open, which means they can be used for pool fences.


The Biloba is an aluminium hinge and available as standard in a natural anodized finish for internal and external use and a special brushed stainless steel effect or bright chrome finish for internal use only.


The Biloba hinge can be used for 10 and 12 mm Toughened Safety Glass doors from 700 -1000mm wide and/or 100 kg max weight.


The hinge has been tested to over 1 million action cycles, and has been used internationally for several years, so it has a proven track record.  


The hinges are provided in pairs with gaskets for 10 and 12 mm glass and with control valves completely closed.

Refer to the installation and adjustment instructions for further information.



The Biloba hinge is 108mm high x 73mm wide and is available in four versions;

BHS 90-HO – Glass to Wall – Hold Open

BHS 90-NHO - Glass to Wall – Non Hold Open

BHS 180-HO – Glass to Glass (180 degrees) - Hold Open

BHS 180-NHO – Glass to Glass (180 degrees) Non Hold Open