SingleDisc MB100

Glass Balustrade System


The SingleDisc MB100 is a side fixed frameless glass balustrade system 


The SingleDisc MB100 was designed to provide solid single point clamping, as an option to double disc or continuous plate systems. The outer and inner discs are simple circular profiles and the single fixing point means it can be located on the edge of narrow concrete slabs, steel or timber profiles.


The SingleDisc MB100 is 100mm diameter. The inner spacer is 30mm thick and the outer plate 10mm thick. The fitting uses M12 fixings.


Material & Finish

The SingleDisc MB100 is made from 316 grade stainless steel and is available in machine satin or polished finish.

Typical Setout

600mm centres for 12mm in Occupancy A barriers up to 1100mm height

400mm centres for 12mm in Occupancy A, C3, B, E barriers up to 1150mm height    

400mm centres for 15mm in Occupancy A, C3, B, E barriers up to 1250mm height


Refer to MB100 design tables and PS1 for more detailed information 



The system is glazed with Metro Performance Glass, as follows

12 & 15mm TempaFloat Toughened Safety Glass

12 & 15mm TempaSoak Heat Soaked Toughened Safety Glass

12 & 15mm TempaPrint or TemapScreen Ceramic Frit Toughened Safety Glass

13.5 & 17.5mm SafeLite Toughened Laminated Safety Glass 



The System has been tested in NZ to AS/NZS 1170 barrier loadings in accordance with B1/VM1 Amendment 8


The system can be used for compliance with NZ Building Code Clause F4 – safety from falling.

The System can be used for residential and commercial Occupancy A, B, E and C3 balustrades, with the fitting set out as per the Producer Statement (PS1), design tables and fixing details.


For compliance with the DBH Guidance on Barriers, heat soaked toughened glass is recommended and for barriers over 5m from the floor, an interlinking handrail or toughened laminated safety glass, are recommended. (Refer clause