Glass Balustrade Connector
The Austvision AlphaLink is a profiled glass link connector designed primarily for balustrade infill panels, pool fences and internal glass screens connected to posts and balusters.
The AlphaLink uses a simple technique of connecting Toughened Safety Glass panels to a post or frame by means of a slotted fixing and pre-located M10 bolt and tightening nut. This avoids the need for welding tabs to the post and makes measuring and installation easier. It can also be adjusted for angle to address inaccuracies on site for floor levels and stair rakes.
The AlphaLink is available with 2 fixing options;
SD50/150 – 50mm stepped disc glass bolt connector
CS50/150 – 50mm countersunk disc glass bolt connector
Material and Finish
The fittings are cast 316 marine grade stainless steel in satin and polished finish.
The AlphaLink can be used with Metro GlassTech TempaFloat, TempaSoak, TempaScreen or TempaPrint Toughened Safety Glass (TSG) or SafeLite Toughened Laminated Safety Glass (TLSG)
(Refer Metro GlassTech Safelite brochure).
- Easy to measure and install
- Simple slotted fixing technique
- Adjustable for stair rake
- Suitable for 8mm toughened to 22mm laminated glass
- Good corrosion resistance
- Appealing “alpha” shape
- Range of fitting options
The AlphaLink can be used in conjunction with glass panels selected from the GANZ Balustrade Design Tables in accordance with design loads selected from AS/NZS 1170, and applied in accordance with B1/VM1.