Ozone

Hydraulic Patch Fitting

 

The Ozone Hydraulic Patch Fitting is a new innovation for self closing frameless internal glass doors.

The Ozone Hydraulic Patch Fitting is surface mounted directly to the floor making it easy to install and thus a more cost effective option for doors. Direct mounting to the floor is done with an adjustable base plate and this removes the need for pre-casting or cutting floor spring boxes, which is a slow messy process creating concrete dust and potentially weakening the floor slab.

The Ozone’s innovation is in the hydraulic closer mechanism which fits within the patch fitting, and allows closing adjustment like a floor spring. The closer mechanism can be non hold open or be 90 degree hold open.

 The patch fitting is slightly larger than a normal patch fitting at 190 x 70mm, but does not look out of place when used in typical frameless glass entry.  The patch fitting comes with a 304 satin stainless steel covers for internal use.

The Ozone Hydraulic Patch Fitting is suitable for internal doors up to 1000mm wide made from

8 to 12mm Toughened Safety Glass up to 100kg maximum weight.

     

Types

Ozone FH-100-HO – Hold open – 90 degree

Ozone FH-100-NHO – Non hold open

  

Ozone HS

High Strength Hydraulic Patch Fitting

 

The Ozone HS is a high strength hydraulic patch fitting for self closing frameless glass doors.

The Ozone Hydraulic Patch Fitting is surface mounted directly to the floor making it easy to install and thus a more cost effective option for doors. Direct mounting to the floor is done with an adjustable base plate and this removes the need for pre-casting or cutting floor spring boxes, which is a slow messy process creating concrete dust and potentially weakening the floor slab.

The Ozone’s innovation is in the hydraulic closer mechanism which fits within the patch fitting, and allows closing adjustment like a floor spring. The closer mechanism can be non hold open or be 90 degree hold open.

 The Ozone HS patch fitting is slightly larger than a normal ozone patch fitting and is 196 x 80mm, but does not look out of place when used in typical frameless glass entry.  The patch fitting comes with 316 satin stainless steel covers .

The Ozone HS Hydraulic Patch Fitting is suitable for ;

  • external doors up to 1000 mm wide
  • internal doors up to 1250 mm wide
  • 10, 12 and 15mm Toughened Safety Glass
  • Maximum door weight up to 100kg

     

Types

Ozone FH-105-HO – Hold open – 90 degree

Ozone FH-105-NHO – Non hold open